From RSI - Robotic Systems Integration - SynqNet Systems
The DSP Series Motion Controllers are a legacy product, originally designed by Motion Engineering, Inc. of Santa Barbara, California which is now Danaher Motion. RSI provides Technical Support for all DSP Series customers.
Are you a DSP Series customer looking to upgrade your hardware to SynqNet with minimal software investment? Try our DSP to RapidCode Translator.
Can't find a SynqNet Drive to replace you existing drive? Try one of our SynqNet Remote Motion Blocks.
DSP Series
| Bus Type | Name | Picture | Description |
| PCI | DL PCI |  | 1 to 4 axes (PCI replacement for LC/DSP) |
| PCI | PCI DSP |  | 1 to 4 axes |
| ISA | PC DSP | 1 to 8 axes | |
| ISA | PCX DSP |  | 1 to 8 axes |
| ISA | LC DSP or SL DSP |  | 1 to 4 axes |
| ISA | Sercos DSP | 1 to 8 axes | |
| PC-104 | 104 DSP |  | 1 to 4 axes |
| PC-104 | 104X DSP |  | 1 to 8 axes |
| PC-104 | Sercos104 DSP | 1 to 8 axes |
DSP Accessories
STC Blocks
| Name | Image | MEI Part Number | RSI Part Number | Description |
| STC-136 | 
| C002-0012 | Screw Terminal Connection module that converts two CBL-68 to screw terminal connections. One cable is required for every four axes. Screw terminals are wired 1-to-1 to the 68 pin cable connector
(180mm x 77mm) | |
| STC-D15 | 
| C002-0009 | Screw Terminal Connection module. | |
| STC-D50 | 
| C002-0006 | Screw Terminal Connection module. | |
| STC-50 | 
| C002-0005 | Screw Terminal Connection module. | |
| STC-26 | 
| C002-0003 | Screw Terminal Connection module. | |
| STC-20 | 
| C002-0002 | Screw Terminal Connection module. |