From RSI - Robotic Systems Integration - SynqNet Systems
PCI DSP - DSP series controller
Are you a DSP Series customer looking to upgrade your hardware to SynqNet with minimal software investment? Try our DSP to SynqNet Translator.
Contents |
Documentation
| Brochure | PCI DSP.pdf |
NOTE: The DL/PCI and the PCI/DSP motion controllers require 5 volts over the PCI Bus. They are not compatible with the 3.3 volt PCI Bus. Please note that new PCs are phasing out the 5 volt PCI Bus in favor of the 3.3 volt PCI Bus. Check the PCI slot in your PC to verify that it is 5 Volts..
DSP Pinouts: Motor Axes 0-3
Use the STC-136 for easy prototyping with the motor I/O connectors of the DSP-PCI.
Motor Axes Connections— Motor Axes 0-1, 68-pins
Motor Axes Connections— Motor Axes 2-3, 68-pins
User I/O Connections — 50 I/O
The User I/O connector for the DSP-PCI is used with the STC-D50.
