From RSI - Robotic Systems Integration - SynqNet Systems
SQIO Housing
DIN Rail Panel Mounting Base:
SQIO modules have been designed to be compatible with a standard Phoenix Contact DIN rail panel mounting base (raft). Although the width of the housing must be designed to hold a PCB whose width is 100mm (3.94in), the length of the housing can be customized accordingly, depending on the combination of connected board modules.
Housing Part Numbers:
Phoenix Contact
Phoenix Contact Inc.
Calculating Total Length:
The following calculation can be used to determine the total length(cm) of housing that can be used with an SQIO setup. In order to accomodate for the extra space that the end caps provide, 0.35cm should be subtracted from the total length.
Total Length(cm) =
SQID + m * (ADC4DAC4)
+ m * (ADC4DAC4)
+ m * (MIXEDMODULE1)
+ m * (HSIN32)
– 0.35cm For end caps
– j * (0.6cm) For joint connections
NOTE: For each joint connection, subtract 0.6cm (to compensate for mated connectors).
where, m = number of modules
j = number of joint connections
SQID (T019-000x) = 10.7cm
ADC4DAC4 (T021-0001) = 11.7cm
DIN32DOUT32 (T020-0001) = 17.4cm
MIXEDMODULE1 (T022-0002) = 30.6cm
HSIN32 (T024-0001) = 8.7cm
Example:
Information taken from Danaher Motion.