All possible RSI Error Messages
Invalid controller number.
Invalid server name for CLIENT controller.
Invalid controller type.
Invalid RSI ID.
Not the controller Sync interrupt.
Custom controller firmware required.
Home Method not (yet) supported.
Capture failed.
Invalid Home Velocity.
Invalid Home Slow Velocity.
Invalid Home Acceleration.
Invalid Home Decleration.
User canceled homing operation.
Homing failed to reach the desired state of a switch.
This method is not currently supported.
The error log is empty.
The error log is full.
This node is not an I/O node.
The address type requested is unknown or unsupported.
This method is not supported in this version.
Timed out while waiting for MotionDone.
The text for this error will be dynamically generated in the source code.
Axis Number is out of the range of possible values.
The Axis command position did not get set.
The axis is not mapped to a motion supervisor.
The CAN firmware is not valid.
The CAN firmware does not match the software version.
The CAN firmware did not initialize.
The CAN network number is out of the range of possible values.
The CAN node does not support the specified I/O.
RapidCode Errors
Copyright © 1998 - 2010. All Rights Reserved. Robotic Systems Integration Inc. Tel: (312) 541-2600. Fax: (312) 541-2630 version 4.x | version 6.x